Herbatint Mahogany Chestnut 4M 135ml

Herbatint Mahogany Chestnut 4M 135ml

Herbatint Mahogany Chestnut 4M 135ml

Regular Price $21.99 Special Price $15.99

Herbatint is the permanent ammonia-free colouring, containing 8 organic herbal extracts, which covers 100% of grey hair for a natural and intense result that is rich in highlights. Your hair regains brightness and vitality, and is immediately healthier and naturally beautiful.

Availability: In stock
SKU
190017541

UNIQUE AND GENTLE FORMULA
AMMONIA - RESORCINOL - PARABENS - ALCOHOL – FRAGRANCE FREE

Dermatologically tested on sensitive skin, its skin compatibility is excellent. This result confirms the brand’s distinctive quality and its unique finely balanced formula. The developer contains a low hydrogen peroxide concentration (less than 3% after mixing, equivalent to 10 volumes), well below the 6% limit permitted by the European legislation (EC NO 1223/2009).

Herbatint uses gluten-free and Nickel tested ingredients. Suitable for vegans.

NATURAL INGREDIENTS

A formula enriched with 8 organic herbal extracts to nourish and protect hair and scalp, preserve colour intensity and provide a natural and long-lasting result. 

  • ALOE VERA BARBADENSIS

     

    Protects and nourishes the hair while colouring. Vitamins and minerals perform an intense natural nourishing and anti-inflammatory action, also conveying the colour inside the hair fibers without damaging them.

     

  • LIMNANTHES ALBA

     

    Hydrates and shines the hair thanks to the oil extracted from its seeds that effectively restores the natural lipid barrier. E-F vitamins, protein, fiber, amino acids and glucose, give body and shine resulting in nourished hair, intense and long-lasting colour.

     

  • CINCHONA CALISAYA

     

    Its bark extract tones and strengthens the scalp, thanks to its sebum-regulating action it protects both hair and skin.

     

  • HAMAMELIS VIRGINIANA

     

    Rich in essential oils, including acid oils, and flavonoids, it gives strength and shine to the hair, while performing an invigorating, soothing and purifying action.

     

  • ECHINACEA ANGUSTIFOLIA

     

    Its skin-purifying and natural soothing action is performed by its active ingredients, including oils, acids, betaine and polysaccharides. Hydration, regeneration and nutrition of the hair associated with the protection of the skin.

     

     

  • JUGLANS REGIA

     

    The antiseptic properties and nutrients of walnuts intensify and enhance the colour while maintaining the pH balance of hair and skin.

     

  • RHEUM PALMATUM

     

    It intensifies the colour and protects the skin giving brightness and tone to the hair, fixes the colour and performs an anti-inflammatory action.

     

  • BETULA ALBA

     

    Its re-mineralizing and toning properties combined with its emollient effect regenerate and protect hair and scalp.

30 COLOURS TO BE MIXED

Find your ideal shade, by choosing a single colour or by blending together more nuances to create your own unique and natural look. The bottles can be reclosed, allowing to preserve the product that has not been mixed for later applications.

EASY TO APPLY

Herbatint colouring gel is easy to mix and apply thanks to its gel consistency and its odourless formula. A perfect colour result in only 40 minutes!

COLOUR RESULT 

Herbatint’s gentle formula with a low hydrogen peroxide concentration (10 volumes) allows you to lighten your natural colour up by a maximum of 2 tones. Only colouring with higher hydrogen peroxide concentrations (30-40 volumes) have a higher bleaching power which inevitably affects the hair’s structure and health.

RESPECTING NATURE

The Herbatint packaging is made of totally recyclable uncoated paper with designation of origin. Herbatint is against animal testing and is suitable for vegans. The bottles can be reclosed and used again, allowing you to use the only necessary product and keep the rest for later applications to avoid useless waste.

HOW TO APPLY HERBATINT

 
  • Mix an equal amount of colour and developer in a plastic or glass bowl (not metal), the quantity depends on hair length and volume.
  • Mix with a brush until you obtain a gel consistency and apply the product to dry and unwashed hair, starting from the roots.
  • Leave for 40 minutes, it is important to stick to the processing time.
  • Rinse thoroughly until the water is completely clear. Tilt your head back while you rinse so that the product does not get into your eyes. Then apply the Herbatint Normalising Shampoo.
  • After shampooing you can complete the treatment by using the Royal Cream, Herbatint regenerating conditioner, which you should leave in for 5 minutes and rinse again.

REMEMBER

If you carefully close the bottles containing the unused product, taking care not to swap the caps, the product that has not been used and has not been mixed can be stored for further applications. More information in the leaflet enclosed in the box.

FIRST APPLICATION

For professional result we suggest you separate your hair into four equal sections, dividing them in half again by using a comb:

  • The first one, vertically from the center of the frontal hairline to the center of the back hairline,
  • The second one, horizontally from behind one ear to behind the other.

In case of very thick hair you should apply the product on thin hair strands to ensure that the dye reaches all the hair evenly. Always start from the front.

1ST. CASE - APPLYING ON NON-COLOURED HAIR

  1. Apply the product strand by strand, distributing from root to ends. Dispose of any unused mixed product.
  2. Leave it for 40 minutes.

2 ND.CASE – APPLYING ON PREVIOUSLY COLOURED HAIR

  1. Apply the product only on the regrowth strand by strand.
  2. Leave it for 30 minutes.
  3. Apply the rest of the product on all your hair down to the ends and wait another 10 minutes (total processing time 40 minutes) without combing it.

ONCE DEVELOPMENT TIME IS OVER

  1. Rinse thoroughly until the water is perfectly clear. Rinse tilting your head backwards to avoid contact with eyes.
  2. Apply the Herbatint Normalising Shampoo and rinse.
  3. Apply the Royal Cream, leave for 5 minutes, then rinse and dry your hair as usual.

FOR EXCELLENT COVERAGE OF GREY HAIR

Colours of the Natural (N) series from 1N to 8N cover 100% of grey hair starting from the first application. Tones 9N and 10N have an extremely low concentration of colouring pigments and thus they must be mixed with a small amount of 8N to obtain the best coverage.

If you wish to use one of the tones of the Ash (C), Golden (D), Copper (R), Golden-Copperish (DR), Mahogany (M) or Flash Fashion (FF) series and you have a high percentage of grey hair, for best results you should mix the colour you have chosen (for example, 4R) with an equivalent shade of the Natural (in this case the 4N) series. As a rule, the higher the percentage of grey hair, the greater the amount of N in the equivalent shade to be used (see the table).

Example: if you have a high percentage of grey hair (more than 60%) and you have chosen to use 4R, we recommend mixing 40 (ml) of 4N with 20 (ml) of 4R and complete by adding 60 (ml) of developer for a right mixing balance between colour and developer 1: 1.

REMEMBER

For professional results we suggest you to separate your hair into four equal sections, dividing them in half again by using a comb:

  • The first one, vertically from the center of the frontal hairline to the center of the back hairline.
  • The second one, horizontally from behind one ear to behind the other.


In case of very thick hair you should apply the product on thin hair strands to ensure that the dye reaches all the hair evenly. Always start from the front.
Start applying on the two frontal areas where usually the greatest amount of grey hair is concentrated. In case of very thick hair, apply the product on thin hair sections so that the dye reaches all the hair evenly.

To perfectly cover grey hair ‘deposit’ the colour instead of ‘brushing’ it on areas with a greater concentration of grey hair. The greater the area to be coloured, the greater amount of product to be used.

HOW TO MIX FF  TONES WHEN THERE IS GREY HAIR

When there is a high percentage of grey hair, for best results we recommend using the FF (Flash Fashion) nuance combined with a tone of the series N (Natural), otherwise the colour might come out brighter than expected.

  • If you choose the FF3 shade, combine it with 5N.
  • If you choose any other nuance of the FF series, combine it with 7N.

HOW TO MIX TWO OR MORE SHADES

The 30 colors of the Herbatint range can be mixed together. Mix more nuances to create your own unique and natural look.

With Herbatint you can create unique and personalized looks by mixing two or more shades, but you must always remember to respect the mixing ratio 1:1 between color and developer.
If you want to mix the same amount of 2 shades, let’s say 6N and 7D, combine 30 (ml) of 6N + 30 (ml) of 7D (= 60 ml of color) with 60 (ml) of developer.

Measure, mix and apply, in three easy steps you can create the look that best suits your personality!

REMEMBER

Herbatint is compatible with other treatments such as highlights. Indeed your hairdresser can create lighting effects and straighten the hair or do a wave.
Here are some tips to customize your color:

BLEND AWAY OR FADE WARM HIGHLIGHTS

Use the shades of the C Ash series, designed to neutralize and/or contrast unwanted red or copperish highlights, mixing them with a Natural (N) shade of the tone you want to obtain.

For example, you are starting off from a 5 Golden and you would like to obtain a 5 Natural?
Here's what you should do

2 PARTS OF 5N + 1 PART OF 6C

Or, in case you apply 60 (ml) of coloring,

  • Mix: 40 (ml) of 5N + 20 (ml) of 6C
  • Complete with 60 (ml) of developer in order to respect the 1:1 mixing ratio between color and developer.

ACCENTUATE OR INTENSIFY WARM HIGHLIGHTS

Use the nuances of the FF Flash Fashion series choosing the same shades of the series you will use.
For example, you start off from 7 Copper and you would like to get a 7 shade with intense highlights?

2 PARTS OF 7R + 1 PART OF FF6

Or, if you apply 60 (ml) of coloring,

  • Mix: 40 (ml) of 7R + 20 (ml) of FF6
  • Complete with 60 (ml) of developer in order to respect the 1:1 mixing ratio between color and developer.

 

More Information
Barcode021718500163
ManufacturerHerbatint
SKU190017541
Free Shipping Yes
Write Your Own Review
You're reviewing:Herbatint Mahogany Chestnut 4M 135ml
You Might Also Like